Table of Contents
Did you know that in the United States alone, there are about 136.57 million units of housing? In 2019, the rate of homeownership was about 65.1%.
If you’re a homeowner, then you’ll want to keep the inside and outside of your home in tip-top shape. At times, it can feel overwhelming trying to keep up with everything and making sure that you’re taking care of it properly.
Are you thinking of trying pressure washing? There are different factors that you’ll want to know before you begin. Read this guide on what you should spray before you begin pressure washing successfully today!
What Should I Spray Before Pressure Washing?
First, before you start spraying here, you’ll want to decide what you’ll be pressure washing. If you’re going to be pressure washing concrete, you’ll first want to remove hoses, toys, dirt, electrical cables, and big stones.
Tape off the area before you start to avoid damaging other areas. You’ll want to choose a common concrete cleaner first. Just make sure that it’s for outdoor use.
Determine whether the stain is in or outside and if it’s deep and serious. You don’t need to buy the heaviest option if you’re going to be treating a light area.
Consider a degreaser for tougher areas to clean. Some common cleaners for concrete include alkaline, acidic, Ph-neutral, and others. If you’re thinking about pressure washing the siding of your home, it’s a good idea to leave it to the professionals.
Pressure Washing Tips for Beginners
If you’re a complete beginner, it might be best to leave it to the professionals. Before you begin, you’ll want to ensure that you’re using the correct nozzle.
A 40-degree nozzle spray is best for patios, decks, house siding, and sidewalks. A 0-degree nozzle is best for removing clumps of spray. Always use the lowest setting whenever possible.
Use a cleaning or chemical solution before you begin. Don’t let the cleaning solution dry on the surface. This could cause the dirt to be deposited.
Cleaning Wood
As you’re looking for the pros of pressure washing near me, you might not know that pressure washing can restore wood. Think about using it on your wood fencing or deck.
Make sure that you use a wood sealer and a gas-powered pressure washer. If you use an electric pressure washer, it’ll take longer, but you can use it.
Use an up and down motion as you use the pressure washer. Don’t let the spray stay in one place. You might have to make a few passes over an area as well.
Understanding What You Should Spray Before Pressure Washing
This guide should give you a better idea of the different items you can spray before pressure washing. Take your time deciding on the best option for you.
Would you like to read more informative home and real estate content? Be sure to check out our other articles on our site today.
